Rfalconcam Forum

Support => Camera Problems => Topic started by: ezsha on 26-Jun-12, 01:10:32 PM



Title: For banding day - Cam 4 platform maintenance? *RESOLVED*
Post by: ezsha on 26-Jun-12, 01:10:32 PM
Cam 4's cover platform seems to be blowing around quite a bit in the wind... around 13:03 shows it bouncing up and down quite a bit, and can hear it banging on the audio.

Didn't know if it was designed this way, or if it might need fixing...


Title: Re: For banding day - Cam 4 platform maintenance?
Post by: ezsha on 26-Jun-12, 01:25:46 PM
Thanks for the zoom, Shaky! It appears it's just the top layer, and not the whole platform!


Title: Re: For banding day - Cam 4 platform maintenance?
Post by: Shaky on 26-Jun-12, 01:26:23 PM
The top layer of plywood has come loose and is flapping. It will probably break off before banding day. The rest should hold up until we can replace it.