THE FORUM

22-Oct-21, 01:04:10 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
Note: The views expressed on this page are not necessarily those of GVAS or Rfalconcam.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: For banding day - Cam 4 platform maintenance? *RESOLVED*  (Read 1519 times)
0 Members and 1 Guest are viewing this topic.
ezsha
Tiercel
******

Like Count: 25
Offline Offline

Posts: 691


View Profile
« on: 26-Jun-12, 01:10:32 pm »

Cam 4's cover platform seems to be blowing around quite a bit in the wind... around 13:03 shows it bouncing up and down quite a bit, and can hear it banging on the audio.

Didn't know if it was designed this way, or if it might need fixing...
« Last Edit: 26-Jun-12, 01:26:49 pm by Shaky » Logged
ezsha
Tiercel
******

Like Count: 25
Offline Offline

Posts: 691


View Profile
« Reply #1 on: 26-Jun-12, 01:25:46 pm »

Thanks for the zoom, Shaky! It appears it's just the top layer, and not the whole platform!
Logged
Shaky
Bathrobe Brigadier
Administrator
Never Leaves 'Puter
*********

Like Count: 349
Offline Offline

Posts: 6,621


Working on my book


View Profile WWW
« Reply #2 on: 26-Jun-12, 01:26:23 pm »

The top layer of plywood has come loose and is flapping. It will probably break off before banding day. The rest should hold up until we can replace it.
Logged

Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Sponsored By

Times Square
powered by Shakymon